本站所列毕业设计(论文)资料均属于原创者所有,初衷是为大家在毕业设计(论文)过程中参考和学习交流之用。

毕业设计我帮你

基于PLC自动门控制系统设计

基于PLC自动门控制系统设计

自动门就是指可以将人进出门的动作或将一种入门授权(刷卡、指纹等)识别成门信号的控制单元,通过驱动自动控制系统将门开启,在人离开探测范围后再把门自动关闭,并对开门和关门的过程实现自动控制的系统。在自动门控制领域,各种新技术也是层出不穷,不仅在

如需购买请QQ扫描右边二维码或者加QQ 3449649974 咨询 毕业设计(论文)代做请加QQ 3139476774


  • 详细描述

    基于PLC自动门控制系统设计
    摘要随着时代的进步,社会的发展,在我们的日常生活发生了很大的变化。一个自动化,智能化世界已经开始出现在我们的视野,为我们提供了很大的方便。自动门就是自动化设备中一个典型代表,本设计是运用所学的知识,结合设计的实际需要来做的。
        本文是关于自动门控制系统的设计,自动门系统主要由可编程逻辑控制器(PLC),一个感应装置,驱动装置和驱动装置。主要的工作原理是:物体内信号感应装置会检测判断PLC的状态,自动门采用PLC信号,然后发送控制信号,驱动装置由驱动装置驱动操作。
    关键词:自动门; PLC可编程控制器 ;传感器; 工作原理

    PLC automatic door control system

    Abstract With the progress of the times, the development of the society, great changes have taken place in our daily life. An automated, intelligent community has begun to appear in our view, which provides much convenience to our. A typical representative of automatic door is in the process of automation, this design is the use of knowledge, combined with the actual needs of the design.
    This article is about the design of the automatic door control system, automatic door system is mainly composed of a programmable logic controller (PLC), an induction device, driving device and a driving device. The main working principle is that a body or an object signal induction device will be detected to judge the state of PLC, automatic door then received PLC signal, and then sends the control signal, the driving device is driven by a driving device in operation, the door.
    Keywords:  PLC programmable controller;Automatic door;The sensor;The Working principle
     目     录
    摘要 5
    第一章 引言 8
    第二章 自动门控制系统的设计要求 8
    2.1 自动门的功能需求分析 8
    2.2 自动门的控制要求 9
    2.3 自动门技术参数 9
    第三章  自动门控制系统的体方案设计 10
    3.1 自动门控制系统构成 10
        3.2 自动门控制系统的原理 10
    章 自动门控制系统的硬件设计 11
    4.1 可编程控制器的选型 11
       4.1.1 输入输出(I/O)点数的估算 11
           4.1.2 存储器容量的选择 11
       4.1.3 控制功能的选择 11
       4.1.4 机型的选择 11
       4.1.5 对PLC响应时间的选择 11
    4.2 稳压电源的选择 16
    4.3 无刷直流电机的应用 18
       4.3.1 直流电动机的调速 19
           4.3.2 直流电动机的优势 21
        4.4 感应器的选型 21
       4.4.1 自动门感应器的原理 22
           4.4.2 微波自动门感应器WB-3004 22
       4.4.3 自动门感应器的调整 23
       4.4.4 自动门感应器可能出现的问题与解决办法 23
        4.5 门磁的工作原理及其安装方法 24
        4.6 传动装置 25  
        4.7 限位开关 26
    第五章 自动门控制系统的软件设计 27
        5.1  PLC梯形图概述  27
        5.2 自动门工作流程  27
    5.3 梯形图的设计  28
        5.3.1 自动门I/O地址分配表及梯形图 29
        5.3.1 指令表 31
        5.4 自动门控制系统原理图 32
        5.5 工作过程的分析 32
    第六章 程序调试 32
    6.1 硬件线路连接 32
    6.2 联机调试 32
    结束语 33
    参考文献 33
    毕业实践总结 34
    致谢 35
    附录 39
    英文翻译另页
    参考文献:
    [1]杨亚萍《电气控制与PLC》     北京化学工业出版社2009.07
    [2]方承远《电气控制原理与设计》    北京机械工业出版社2000
    [3]何衍庆《常用PLC应用手册》     电子工业出版社2013.3.7
    [4]汪志择《可编程控制器原理及应用》   西安电子科技大学出版社2004
    [5]阮有德  《电气控制与PLC实训教程》  人民邮电出版社  2012.10.10
    [6]齐占庆《电气控制技术》    北京机械工业出版社   2008.7.8
    [7]张万忠. PLC应用及维修技术[M]. 北京: 化学工业出版社. 2014: 7-22.
    [8]田瑞庭. 可编程控制器应用技术. 机械工业出版社. 1993.
    [9]崔亚军. 可编程控制器原理及程序设计. 电子工业出版社. 1993.
    [10]丁炜. 可编程控制器在工业控制中的应用. 化学工业出版社. 2004.
    [11]陈立定,《电气控制与可编程控制器技术》  北京人民邮电出版社  2007.3.5
     
    收缩