本站所列毕业设计(论文)资料均属于原创者所有,初衷是为大家在毕业设计(论文)过程中参考和学习交流之用。

毕业设计我帮你

洛氏硬度检测方法对材料性能检测的影响

洛氏硬度检测方法对材料性能检测的影响

本文对洛氏硬度的原理,硬度检测的选择,在生产中的应用和在试验中应注意的关键问题进行了综合性和实质性的分析,洛氏硬度检测操作简便、迅速,工作效率高。

如需购买请QQ扫描右边二维码或者加QQ 3449649974 咨询 毕业设计(论文)代做请加QQ 2269757180 微信号:bylwwwww


  • 详细描述

    洛氏硬度检测方法对材料性能检测的影响
    摘要:洛氏硬度测量是工业生产中常见的用于金属硬度检测的方法,洛氏硬度硬度操作较为简单,对工件产生的压痕相对较小,对工件的损伤较小,归于无损检测一类,可对成品直接进行测量,并且它的测量范围广,较为常用的就有HRA 、HRB、 HRC三种标尺可测量各种软硬不同,厚薄不同材料,本文通过对洛氏硬度,洛氏硬度实验方法的介绍和分析,以及与布氏硬度的对比,进一步的指出了洛氏硬度的应用以及适用范围,在应用中使洛氏硬度得到了了更好的改善和进步。
    关键词:硬度检测;洛氏硬度检测;适用范围;
    Rockwell hardness testmethods affect materialproperties test
    Abstract: Rockwell hardness is measured in a common industrial process for the detection of metal hardness, Rockwell hardness hardness operation is simple,the indentation on the workpiece is relatively small,less damage to the workpiece, attributed to non-destructive testing of these categories,direct measurements of the finished product, and itswidemeasurement range, the more commonly used there HRA HRB HRC ruler to measure a variety of hardware and software in three different thickness of different materials,Based on the Rockwell hardness,Rockwell hardness test method introducedand analysis,and compared with the Brinell hardness,and further pointed out the application and scope of Rockwell hardness,Rockwell hardness of manipulation in the application got the better improvement and progress.
    Key words: hardness test; Rockwell hardness test; Materials;Scope

    目录
    第一章 绪论…………………………………………………………………………………8
    第二章 硬度常用检测方法介绍……………………………………………………………8
     2.1 金属材料硬度的定义…………………………………………………………………8
     2.2金属洛氏硬度检测方法的研究…………………………………………………………9
     2.3 硬度试验的作用和特点………………………………………………………………10
     2.4 硬度试验………………………………………………………………………………11
    第三章  常见的硬度试验的作用和特点…………………………………………………12
     3.1 布氏硬度试验…………………………………………………………………………12
      3.1.1布氏硬度试验原理…………………………………………………………………12
     3.2 维氏硬度试验…………………………………………………………………………14
      3.2.1维氏硬度试验原理…………………………………………………………………14
    第四章 洛氏硬度简介………………………………………………………………………15
     4.1洛氏硬度的硬度标准…………………………………………………………………16
     4.2洛氏硬度的实验原理…………………………………………………………………17
     4.3洛氏硬度的试样要求…………………………………………………………………23
      4.3.1按材料种类选择……………………………………………………………………23
      4.3.2按样品的硬度范围选择……………………………………………………………23
      4.3.3按厚度或硬化层深度………………………………………………………………24
     4.4 洛氏硬度试验方法以及影响…………………………………………………………24
     4.5洛氏硬度检测及注意事项……………………………………………………………26
    第五章 洛氏硬度检测方法对材料性能的影响……………………………………………29
    结论…………………………………………………………………………………………30
    参考文献……………………………………………………………………………………31

    参考文献
    [1]宗斌,王二平,魏建忠.金属洛氏硬度常用标尺的选择与实践教学[J].试验时科学,2010 (1) : 95-97.
    [2]张泰华,杨业敏,纳米硬度技术的发展和应用,力学进展,2002, 32 (3 ):349364
    [3]杨迪,李福欣编著,显微硬度试验,北京:中国计量出版社,1988, 1
    [4]Cheng Yang-Tse, Cheng Che-Min. Scaling, dimension-al analysis and indentation measurements [J].M ateri- als Science and Engineering R,2004, 44: 91一149.
    [5]杨迪.金属硬度实验【M].北京:中国计量出版社,1983.
    [6]Bhushan B, Gupta B K.  Handbook of Tribology [M〕.New York:  McGraw-Hill,  1991.
    [7]虞伟良.硬度测试技术的新动态与发展趋势【J].理化检验一物理分册,2003, 39(8):401一40
    http://www.bysj580.com/

    收缩